141 Frameset Gen 1
"It’s all about ripping trails and having a blast!" - Enduro Magazine
27.5/29" | 141mm | 6066-T6
Built to handle everything from your local trail loop to park laps, or even a local Enduro race or two.
Who said versatility has to be boring?
Frames will be supplied with Fox's DPX2 Performance Elite , designed specifically to meet the demands of aggressive trail riders, combining sophisticated damping and fade free performance with incredible light weight.
Seat clamp, axle and sealed cartridge bearing headset included
The Experts' View
Paying With Cyclescheme?
Redeem your certificate in the cart
Our bikes are in high demand, don't miss out. Order now.
60 Day Ride & Return Period
The Purpose
When we launched the 161, many riders loved the Enduro World Series race-focused concept, but we know not everyone has access to world-class steep and technical alpine trails. We listened, and here it is, the 141.
Built to handle everything from your local trail loop to park laps, or even a local Enduro race or two. Taking our proven platform and stretching out the seated position slightly gives riders more room to enjoy those undulating sections of trail.
The 141 is ready to ease you to the top with its steep climbing position, whilst its progressive geo will let you focus on the next chute, tight switch back or fun side hit on the way back down.
Who said versatility has to be boring?
Key Features
Comes as standard with Fox's Updated DPX2 designed for the latest hard-hitting enduro and trail bikes, featuring the ride tuning abilities of an air spring with both compression and rebound adjustment allowing riders to easily dial in a podium-worthy ride.
- Entirely new base valve design and a valved circuit in open mode raises the already high bar for trail performance
- X2 small bump sensitivity meets DPX2 lightweight and simplicity
- One-piece EVOL air sleeve improves responsiveness and sensitivity
- Three-position lever with adjustable Open Mode offers 10 clicks to fine-tune compression
| Wheel size | (P1) 27.5" (P2-4) 29” |
| Max Tyre size | 27.5"/29”x2.6 |
| Headset Upper Cup | ZS44 30.2x41x6.5 45˚/45˚ |
| Headset Lower Cup | ZS56 40x51.9x7 45˚/45˚ |
| Suspension fork travel | 150mm |
| Fork Offset | (P1) 37mm (P2-P4) 42/44mm |
| Rear Shock Size | 205x57.5. Custom Fox Tune |
| Upper shock mount | Trunnion |
| Lower shock mount | 8x30mm |
| Bearings | 4x6900-2RS, 4x6800-2RS & 5x6002-2RS |
| Seat Post | 31.6 |
| Seat Clamp | 34.9 |
| Max Post Insertion | P1 - 230mm P2 - 250mm P3 - 280mm P4 - 300mm |
| Bottom Bracket | 73mm Threaded |
| Max chainring size | Boost/3mm offset 32 tooth |
| Chainline | 52mm. Minimum 168mm Q-Factor |
| Rear rotor mount | Direct 180mm Post Mount (220mm rotor not supported) |
| Rear Spacing | Boost 148mm |
| Axle Size | 178mm x M12*P1.5. Thread length 12.5mm |
| Approx Frame Weight |
P2 - 3.95kg (Without shock, axle, etc.) |
| Torque Specs | Upper Shock mount - 10 Nm Lower Shock Mount - 8 Nm Upper Main Pivot - 12 Nm Lower Main Pivot - 12 Nm Seatstay/Rocker Pivot - 10 Nm Dropout Pivot - 10 Nm |
Coil too?
The frame is designed to run great either a coil or air shock.
Does it fit a water bottle?
Yes! We'd recommend up to a 500ml bottle in a side load cage
Can I set the bike up mullet? (29" Front and 27.5" Rear?)
No, we do not recommend this set up as it will make the bottom bracket too low and slacken both the head and seat angles.
Can I run Plus Size?
The 141 was not intended to run plus, but can clear a 27.5x2.8 tyre. This will lower the bottom bracket height slightly.
|
BETA MAGAZINE RIDE TEST REVIEW |
 |
2021 BICYCLING BIKE AWARDS WINNER |
|
RIDE TEST REVIEW |
|
RIDE REVIEW |
|
FIRST RIDE |